
Licensed & insured · Free estimates
Concrete Grinding in Fresno, CA
Old coatings ground off and the slab prepped for a new floor. Call or fill out the form for pricing.
Homes in Fresno, Madera & Kings counties · businesses anywhere in California
Swipe for more reviews →
Get a Free Concrete Grinding Estimate
Free estimates. Fill out the form or call, and we'll get right back to you.
- Free estimates
- Licensed & insured
- CA license #1103536
- Homes & businesses
Fill out the form below to get your free estimate 👇
Concrete Grinding & Coating Removal
Concrete Grinding & Coating Removal done right the first time
Most floor coatings that peel were put down on concrete that was not ready for them. Paint, old sealer, tile glue and worn-out epoxy keep a new coating from gripping the slab, and a smooth troweled slab can be too slick for a coating to bite into. In the Valley, sealers on patios and garages also bake through 100°F summers and start to flake. Before a new floor goes down, the old one has to come off and the concrete has to be opened up so the next coat has something solid to hold on to.
Ferrer Epoxy Coatings does concrete grinding for homes in Fresno, Madera and Kings counties and for businesses anywhere in California. We grind off old epoxy, paint, sealer and glue, take down high spots, and leave the slab clean and rough enough for epoxy, polyaspartic or urethane cement to bond. Our job photos include a patio slab being ground, a food plant floor after the old coating and topping were removed, and a concrete floor being machine-polished. We are licensed and insured under California license #1103536, and every job starts with a free estimate.
What's included
Our concrete grinding & coating removal services
- 01
Old epoxy removal
Peeling or worn-out epoxy is ground off down to bare concrete, so the new floor bonds to the slab instead of to a coating that is already letting go.
- 02
Paint and sealer removal
Floor paint, flaking sealers and old topcoats come off the slab. This is common on garages and patios where the sun has broken the old finish down.
- 03
Glue and topping removal
Adhesive left behind by carpet, tile or vinyl is ground off, and worn toppings in plants and shops are taken down to sound concrete.
- 04
Surface prep for new coatings
The slab is ground to the open, even texture that epoxy, polyaspartic, quartz and urethane cement floors need to grip.
- 05
High spots and uneven joints
Lips at slab joints and high spots are ground down to cut trip edges and give the new floor a flatter base.
- 06
Grind and seal finishes
For a simple finished floor, the slab can be ground and sealed instead of coated. If you want more shine, it can be polished instead.
Real work · not stock photos
Our concrete grinding & coating removal jobs
Photos from our own concrete grinding & coating removal jobs around Fresno, Madera & Kings counties.
How it works
How a concrete grinding job works
- 1
Free on-site estimate
We look at what is on the slab, how well it is stuck, any cracks or damage, and what floor you want to put down next.
- 2
Plan the job
We pick the approach for the coating being removed. For businesses we can work nights, weekends or during a scheduled shutdown.
- 3
Grind and clean
The old coating, glue or sealer is ground off, high spots are taken down, and the dust is cleaned up so we can check the bare slab.
- 4
Repair and finish
Cracks and damaged spots are repaired, then the new coating, sealer or polish goes down, or the slab is left ready for the next floor.
Customer reviews
What our customers say
“Mike and his crew were excellent to work with on my polished concrete kitchen , pantry and powder room floor. I choose the wrong color (my fault) amd he worked with me to get it right. Love the color and the shine. Crew was very professional. Plan to use him again when I can budget a polished garage floor.”
Kati K.
Polished concrete kitchen, pantry & powder room floor · Google review of Ferrer Epoxy Coatings
“Reasonable price, Negotiable, and great service. Would recommend to friends.”
Joseph T.
Floor coating · Google review of Ferrer Epoxy Coatings
“They do good work in a timely manner.”
Dana M.
Concrete floor coating · HomeAdvisor review of Ferrer Epoxy Coatings
Local pages
Concrete Grinding & Coating Removal by city
Local details and nearby towns for each of our core cities.
- Concrete Grinding in Clovis
- Concrete Grinding in Sanger
- Concrete Grinding in Selma
- Concrete Grinding in Reedley
- Concrete Grinding in Madera
- Concrete Grinding in Hanford
- Concrete Grinding in Lemoore
Also serving Fresno, Calwa, Mayfair, West Park, Old Fig Garden, Malaga, Sunnyside, Easton, Tarpey Village, Bowles, Fort Washington, Fowler and more →
Concrete Grinding & Coating Removal for businesses across California
Commercial and industrial jobs go anywhere in the state. Pages for the cities we hear from most:
- Concrete Grinding in Los Angeles
- Concrete Grinding in San Diego
- Concrete Grinding in San Francisco
- Concrete Grinding in San Jose
- Concrete Grinding in Sacramento
- Concrete Grinding in Anaheim
- Concrete Grinding in Oakland
- Concrete Grinding in Bakersfield
- Concrete Grinding in Irvine
- Concrete Grinding in Long Beach
- Concrete Grinding in Riverside
- Concrete Grinding in Fremont
- Concrete Grinding in Stockton
- Concrete Grinding in Ontario
- Concrete Grinding in Santa Ana
- Concrete Grinding in Santa Rosa
- Concrete Grinding in Corona
Questions
Concrete Grinding & Coating Removal FAQs
What is concrete grinding?
Concrete grinding uses a floor grinder with abrasive heads to take a thin layer off the top of a slab. It removes old coatings, paint, sealer and glue, takes down high spots and opens up the surface so a new coating can bond. It is the main prep step under almost every epoxy or polished concrete floor.
Can you remove old epoxy from my garage floor?
Yes. Peeling, chipped or yellowed epoxy is ground off down to bare concrete, along with any paint or sealer under it. Once the slab is clean and repaired, a new coating can go on, and we can grind and recoat in the same job.
How much does concrete grinding cost?
It depends on the slab, so we price it after seeing it. The square footage, what is on the concrete, how thick it is and how well it is stuck, access to the area and any repairs all play a part, along with what goes down afterward. Call or fill out the form to get a free estimate.
Can you grind a plant or warehouse floor without shutting us down?
Yes. We schedule grinding for nights, weekends or planned shutdowns and can work one area at a time so the rest of the building keeps running. We travel from Fresno for commercial jobs anywhere in California.
What is the difference between grind and seal and polished concrete?
Grind and seal means the slab is ground to clean concrete and then coated with a clear sealer that sits on top. Polished concrete goes through more grinding and polishing steps until the concrete itself has the shine. Grind and seal is the simpler finish, and polished concrete gives a harder, glossier surface. We can talk through both at the estimate.
Related
Often done together

Garage Floor Epoxy
Epoxy garage floors in flake, metallic or solid color, with the slab ground, cracks repaired and a UV-stable topcoat.
See garage floor epoxy
Concrete Repair
Concrete repair, from cracks, joints and spalled spots to broken concrete around drains, driveways and loading docks.
See concrete repair
Polished Concrete
Polished concrete and grind-and-seal floors for kitchens, living areas, shops and storefronts, with old coverings ground off and the slab finished to the sheen you pick.
See polished concrete

Ready to start your concrete grinding project?
Free estimates. Call or fill out the form.


