Ferrer Epoxy Coatings Inc. logo
A worker spreading a liquid coating across a concrete slab with a squeegee

Licensed & insured · Free estimates

Concrete Moisture Mitigation in Fresno & Across California

A moisture barrier on the slab before new floors go down. Call or fill out the form for pricing.

5.05-star rated Google & HomeAdvisor

Based in Fresno · commercial and industrial jobs anywhere in California

Swipe for more reviews →

Get a Free Moisture Mitigation Estimate

Free estimates. Fill out the form or call, and we'll get right back to you.

  • Free estimates
  • Licensed & insured
  • CA license #1103536
  • Homes & businesses

Fill out the form below to get your free estimate 👇

Rather talk? Call us now: (559) 917-1020

Moisture Mitigation

Moisture Mitigation done right the first time

Moisture coming up through a slab ruins floors from underneath. Epoxy blisters and lifts, the glue under vinyl tile and plank goes soft, edges curl, and a white powder shows up along the joints. Many older slabs in the Valley push moisture up all the time, and a slab can look dry on top while it does. Once a coating or glue-down floor seals the surface, that moisture is trapped under it. Often nobody finds the problem until the new floor starts to fail, and by then it has to come back up.

Ferrer Epoxy Coatings installs moisture mitigation systems on concrete slabs before coatings and flooring go down. We are based in Fresno, working anywhere in California. At the free estimate we check the slab for signs of moisture and test it where the floor calls for it. If it needs mitigation, we grind the slab, repair cracks and apply a moisture barrier coat across the floor. Then the finished floor goes on top: epoxy, urethane cement, polyaspartic, or glue-down LVT, VCT or carpet tile. One contractor handles the prep, the barrier and the floor, on nights, weekends or shutdowns.

What's included

Our moisture mitigation services

  • 01

    Moisture checks

    We look for blistering, soft glue and other signs of moisture, and test the slab so the decision rests on readings instead of guesswork.

  • 02

    Grinding and slab prep

    Old coatings, glue and sealer are ground off and the surface is opened up so the moisture barrier bonds to clean concrete.

  • 03

    Crack and joint prep

    Cracks are repaired and joints are prepared so the barrier covers the slab as one continuous layer.

  • 04

    Moisture barrier coat

    A moisture-tolerant coating is applied across the slab to limit the moisture vapor that reaches the floor above it.

  • 05

    Under epoxy and urethane cement

    Epoxy, quartz, flake, polyaspartic and urethane cement floors go on over the barrier as part of the same job.

  • 06

    Under glue-down flooring

    Glue-down LVT and LVP, VCT and carpet tile get a sealed surface to bond to instead of a damp slab.

How it works

How a moisture mitigation job works

  1. 1

    Free on-site estimate

    We look at the slab and any old flooring that has failed, ask what is going down next, and test the slab for moisture.

  2. 2

    Choose the system

    Based on the results and the finished floor, we decide whether the slab needs mitigation and plan the schedule, including nights or weekends.

  3. 3

    Grind and repair

    The slab is ground to clean, open concrete, and cracks, joints and damaged areas are repaired.

  4. 4

    Barrier and finished floor

    The moisture mitigation coat goes down and cures, then the coating or flooring is installed over it.

Customer reviews

What our customers say

  • “Mike and his crew were excellent to work with on my polished concrete kitchen , pantry and powder room floor. I choose the wrong color (my fault) amd he worked with me to get it right. Love the color and the shine. Crew was very professional. Plan to use him again when I can budget a polished garage floor.”

    Kati K.

    Polished concrete kitchen, pantry & powder room floor · Google review of Ferrer Epoxy Coatings

  • “Reasonable price, Negotiable, and great service. Would recommend to friends.”

    Joseph T.

    Floor coating · Google review of Ferrer Epoxy Coatings

  • “They do good work in a timely manner.”

    Dana M.

    Concrete floor coating · HomeAdvisor review of Ferrer Epoxy Coatings

Local pages

Moisture Mitigation by city

Find your town for local details and every service we offer there.

Also serving Fresno, Calwa, Mayfair, West Park, Old Fig Garden, Malaga, Sunnyside, Easton, Tarpey Village, Bowles, Fort Washington, Fowler and more →

Moisture Mitigation for businesses across California

Commercial and industrial jobs go anywhere in the state. Pages for the cities we hear from most:

Questions

Moisture Mitigation FAQs

What is concrete moisture mitigation?

It is a coating system applied to the top of a concrete slab to limit how much moisture vapor comes up through it. It goes on before the finished floor, so epoxy, urethane cement or glue-down flooring stays bonded instead of blistering or coming loose. It is used when a slab tests too wet for the floor going on it.

How do I know if my slab has a moisture problem?

Testing is the only way to know for sure. Warning signs include blistering or bubbling coatings, glue oozing at tile seams, curling tiles, white powder along joints and dark damp patches. A slab can look dry and still push moisture up, so we test it at the estimate when the floor going on it calls for it.

Is this the same as a vapor barrier under the slab?

No. A vapor barrier under a slab is a plastic sheet laid on the ground before the concrete is poured. If a slab never had one, or it has torn or broken down, it cannot be added later without pouring a new slab. A moisture mitigation system works from the top instead, as a moisture barrier coat on the existing concrete.

How much does moisture mitigation cost?

It depends on the slab, so we price it after testing and seeing it. Square footage, how much moisture is coming up, how much old flooring and glue has to come off, crack and joint repair, and the floor going on top all play a part. Call or fill out the form to get a free estimate.

Why do older Valley slabs have moisture problems?

Many older slabs have no vapor barrier under them, or one that has failed, so ground moisture keeps working up through the concrete. A bare slab lets that moisture escape into the air. Once a coating or glue-down floor covers it, the moisture collects under the floor and pushes it loose. Not every slab needs mitigation, and testing tells us which ones do.

Ready to start your moisture mitigation project?

Free estimates. Call or fill out the form.