
Licensed & insured · Free estimates
Flake Epoxy Floors in Fresno, CA
Chip-style epoxy floors with color flake sealed in. Call or fill out the form for pricing.
Homes in Fresno, Madera & Kings counties · businesses anywhere in California
Swipe for more reviews →
Get a Free Flake Floor Estimate
Free estimates. Fill out the form or call, and we'll get right back to you.
- Free estimates
- Licensed & insured
- CA license #1103536
- Homes & businesses
Fill out the form below to get your free estimate 👇
Flake Epoxy Floors
Flake Epoxy Floors done right the first time
Most people come to flake because they want a floor that still looks good on a bad day. Plain concrete shows every tire mark, oil spot and layer of valley dust, and a single glossy color can look dirty an hour after you sweep. A flake epoxy floor, also called a chip floor, breaks the surface into speckled color so small chips, dust and scuffs blend in. The chips also leave a light texture underfoot, which helps when wet tires roll in on a foggy winter morning or wet feet come in through a sliding door.
Ferrer Epoxy Coatings installs flake floors for homes in Fresno, Madera and Kings counties and for shops and commercial spaces anywhere in California. Our flake jobs include a gray, black and white garage floor, a tan-and-gray floor in a family room with a fireplace, and a blue, gray and white full-broadcast floor across a large commercial building with roll-up doors. Every floor starts with the slab ground clean, then a tinted epoxy base coat, a broadcast of flakes until no base shows through, and a clear topcoat that locks the chips in. You pick the blend, and we'll tell you which ones hide dust best.

What's included
Our flake epoxy floors services
- 01
Ground slab, not acid-etched
We grind the concrete instead of etching it, which removes old sealer and paint and leaves a rough, clean surface the base coat can grip.
- 02
Base coat tinted to your blend
The epoxy base coat is tinted close to the main color in your flake, so the floor reads as one color even where the chips land thinner.
- 03
Vinyl flake broadcast
Color flake, the vinyl chips that give these floors their look, is broadcast into the wet base coat until it is covered edge to edge, along the walls and around posts.
- 04
Scraped smooth before sealing
After the base cures, loose chips are swept up and the floor is scraped to knock down sharp edges. That way the topcoat goes on even and the floor isn't rough on bare feet.
- 05
Clear UV-stable topcoat
A clear topcoat seals the chips in place and gives the floor its shine. The flake underneath still leaves a light texture you can feel.
- 06
Blends for homes and businesses
Gray, black and white blends suit garages, warmer tan-and-gray blends sit well in a family room, and blue, gray and white suits a commercial shop. More white flake brightens a dark garage.
Real work · not stock photos
Our flake epoxy floors jobs
Photos from our own flake epoxy floors jobs around Fresno, Madera & Kings counties.
Ideas for your project
More flake epoxy floors ideas
How it works
How a flake floor job works
- 1
Free on-site estimate
We look at the slab and the room, ask how the space gets used, and help you narrow down a flake blend. You get your price once we've seen the floor.
- 2
Grind, repair and base coat
The slab is ground and repaired, then the tinted epoxy base coat is rolled out one section at a time.
- 3
Broadcast the flake
While each section is still wet, flake is broadcast over it until no base coat shows through.
- 4
Scrape and seal
Once the base cures, the loose flake comes up, the surface is scraped, and the clear topcoat goes on to finish the floor.
Customer reviews
What our customers say
“Mike and his crew were excellent to work with on my polished concrete kitchen , pantry and powder room floor. I choose the wrong color (my fault) amd he worked with me to get it right. Love the color and the shine. Crew was very professional. Plan to use him again when I can budget a polished garage floor.”
Kati K.
Polished concrete kitchen, pantry & powder room floor · Google review of Ferrer Epoxy Coatings
“Reasonable price, Negotiable, and great service. Would recommend to friends.”
Joseph T.
Floor coating · Google review of Ferrer Epoxy Coatings
“They do good work in a timely manner.”
Dana M.
Concrete floor coating · HomeAdvisor review of Ferrer Epoxy Coatings
Local pages
Flake Epoxy Floors by city
Local details and nearby towns for each of our core cities.
- Flake Floors in Clovis
- Flake Floors in Sanger
- Flake Floors in Selma
- Flake Floors in Reedley
- Flake Floors in Madera
- Flake Floors in Hanford
- Flake Floors in Lemoore
Also serving Fresno, Calwa, Mayfair, West Park, Old Fig Garden, Malaga, Sunnyside, Easton, Tarpey Village, Bowles, Fort Washington, Fowler and more →
Questions
Flake Epoxy Floors FAQs
Is a flake floor only for garages?
No. Flake works in family rooms, living areas, shops and commercial buildings as well as garages. One of our flake floors is a tan-and-gray blend in a family room with a fireplace and a sliding glass door, and another is a blue, gray and white floor across a large commercial building. Inside the house, people usually choose softer, warmer blends than they would for a garage.
Can I get a white flake epoxy floor?
Yes. Blends with a lot of white flake make a garage brighter and cleaner looking, though a mostly white floor shows dust and tire marks sooner than a mixed blend. A gray, black and white mix, like the garage floor in our photos, keeps the bright look while hiding more of the dust that blows in from farm country.
Will a flake floor hold up to the sun on a covered patio?
Yes, as long as the topcoat is UV-stable. Fresno sun reaches under a patio cover more than most people expect, and epoxy left exposed to strong UV can yellow over time. The speckled flake also hides small color shifts better than a solid color would. For outdoor slabs, see our patio and porch coatings page.
Is a flake floor slippery?
Less than a smooth coating. The chips under the topcoat leave a slight texture that helps with wet tires and wet feet. For entries and shop floors that get really wet, a non-skid texture can be added to the topcoat.
What does a flake epoxy floor cost?
Price comes down to the size of the room, the shape the concrete is in, how much old coating or sealer has to be ground off, and how many cracks need repair. A clean slab in a newer garage is less work than an older family room slab with paint or adhesive on it. Book a free estimate and you'll get a price once we've seen the slab in person.
Related
Often done together

Garage Floor Epoxy
Epoxy garage floors in flake, metallic or solid color, with the slab ground, cracks repaired and a UV-stable topcoat.
See garage floor epoxy
Patio & Porch Coatings
Covered patios, open patios and front porches, with the slab ground first and a UV-stable, non-skid finish on top.
See patio & porch coatings
Metallic Epoxy Floors
Metallic epoxy floors for kitchens, hallways, event spaces and businesses, from pearl-white and gray to bold custom colors, poured over a slab ground smooth.
See metallic epoxy floors

Ready to start your flake floor project?
Free estimates. Call or fill out the form.





