Ferrer Epoxy Coatings Inc. logo
A gray, black and white flake epoxy floor in a garage, seen low across the floor

Flake Floors · Hanford, CA

Flake Epoxy Floors in Hanford, CA

Flake epoxy floors for Hanford homes and businesses. Call or fill out the form for pricing.

5.05-star rated Google & HomeAdvisor

Hanford, Kings County and every town in Fresno, Madera and Kings counties

Swipe for more reviews →

Get a Free Flake Floor Estimate in Hanford

Free estimates. Fill out the form or call, and we'll get right back to you.

  • Free estimates
  • Licensed & insured
  • CA license #1103536
  • Homes & businesses

Fill out the form below to get your free estimate 👇

Rather talk? Call us now: (559) 917-1020

Flake Epoxy Floors · Hanford

Flake Epoxy Floors for Hanford properties

Hanford homeowners and businesses call us for flake epoxy floors for garages, family rooms and shops, in blends from gray, black and white to tan and gray. We're a licensed and insured California contractor (license #1103536), and every Hanford job starts with a free estimate.

In Kings County the work runs from home garages and patios to dairy, packing and shop floors that need non-skid traction and a coating that stands up to daily washdowns.

Customers mention a very professional crew, a floor they love the color and shine of, and a crew that worked with them to get the color right.

A blue and white flake floor running to the roll-up doors of a commercial shop
Our crew's work

What's included

Flake Epoxy Floors we do in Hanford

  • 01

    Ground slab, not acid-etched

    We grind the concrete instead of etching it, which removes old sealer and paint and leaves a rough, clean surface the base coat can grip.

  • 02

    Base coat tinted to your blend

    The epoxy base coat is tinted close to the main color in your flake, so the floor reads as one color even where the chips land thinner.

  • 03

    Vinyl flake broadcast

    Color flake, the vinyl chips that give these floors their look, is broadcast into the wet base coat until it is covered edge to edge, along the walls and around posts.

  • 04

    Scraped smooth before sealing

    After the base cures, loose chips are swept up and the floor is scraped to knock down sharp edges. That way the topcoat goes on even and the floor isn't rough on bare feet.

  • 05

    Clear UV-stable topcoat

    A clear topcoat seals the chips in place and gives the floor its shine. The flake underneath still leaves a light texture you can feel.

  • 06

    Blends for homes and businesses

    Gray, black and white blends suit garages, warmer tan-and-gray blends sit well in a family room, and blue, gray and white suits a commercial shop. More white flake brightens a dark garage.

Kings County

Flake Epoxy Floors around Hanford

We work all over Hanford (near Civic Center Park, Lacy Park and Central Valley General Hospital and out by Hanford Community Medical Center) and throughout Kings County.

Hanford is the Kings County seat, south of Fresno along Highway 198. Hanford is about 29 miles south of our base in Fresno, in Kings County, one of the three counties we cover.

Floors in the Central Valley take 100-degree summers, strong sun through open garage doors, dust blowing in off the fields and slabs that can push moisture up from below. That's why prep matters most: the slab gets ground to open it up, cracks get filled, moisture gets checked, and the finish is a coating built for sun and hot tires instead of a thin coat that yellows or peels.

Real work · not stock photos

Our flake epoxy floors jobs

Photos from our own flake epoxy floors jobs around Fresno, Madera & Kings counties.

  • A tan and gray flake epoxy floor in a family room with a fireplace and sliding glass door
  • A close-up of a glossy flake epoxy floor with sparkle in the flakes
  • A blue, gray and white full-broadcast flake floor across a large commercial building

Ideas for your project

More flake epoxy floors ideas

  • A flake epoxy garage floor in front of gray wall cabinets
  • A gray flake epoxy floor in a two-car garage with the door open
  • A close-up of colored flake chips in a glossy epoxy floor

How it works

How your Hanford flake floor job works

  1. 1

    Free on-site estimate

    We look at the slab and the room, ask how the space gets used, and help you narrow down a flake blend. You get your price once we've seen the floor.

  2. 2

    Grind, repair and base coat

    The slab is ground and repaired, then the tinted epoxy base coat is rolled out one section at a time.

  3. 3

    Broadcast the flake

    While each section is still wet, flake is broadcast over it until no base coat shows through.

  4. 4

    Scrape and seal

    Once the base cures, the loose flake comes up, the surface is scraped, and the clear topcoat goes on to finish the floor.

Customer reviews

What our customers say

  • “Mike and his crew were excellent to work with on my polished concrete kitchen , pantry and powder room floor. I choose the wrong color (my fault) amd he worked with me to get it right. Love the color and the shine. Crew was very professional. Plan to use him again when I can budget a polished garage floor.”

    Kati K.

    Polished concrete kitchen, pantry & powder room floor · Google review of Ferrer Epoxy Coatings

  • “Reasonable price, Negotiable, and great service. Would recommend to friends.”

    Joseph T.

    Floor coating · Google review of Ferrer Epoxy Coatings

  • “They do good work in a timely manner.”

    Dana M.

    Concrete floor coating · HomeAdvisor review of Ferrer Epoxy Coatings

Questions

Flake Epoxy Floors in Hanford: FAQs

Do you do flake epoxy floors in Hanford, CA?

Yes. Hanford is about 29 miles south of our base in Fresno, in Kings County, one of the three counties we cover. We handle flake epoxy floors for garages, family rooms and shops, in blends from gray, black and white to tan and gray there, and the estimate is free.

Does the space need to be empty for flake epoxy floors?

Yes, the floor has to be clear for grinding and coating. We go over what to move before the job and tell you when you can move back in.

What does a flake epoxy floor cost?

Price comes down to the size of the room, the shape the concrete is in, how much old coating or sealer has to be ground off, and how many cracks need repair. A clean slab in a newer garage is less work than an older family room slab with paint or adhesive on it. Book a free estimate and you'll get a price once we've seen the slab in person.

Is a flake floor only for garages?

No. Flake works in family rooms, living areas, shops and commercial buildings as well as garages. One of our flake floors is a tan-and-gray blend in a family room with a fireplace and a sliding glass door, and another is a blue, gray and white floor across a large commercial building. Inside the house, people usually choose softer, warmer blends than they would for a garage.

Can I get a white flake epoxy floor?

Yes. Blends with a lot of white flake make a garage brighter and cleaner looking, though a mostly white floor shows dust and tire marks sooner than a mixed blend. A gray, black and white mix, like the garage floor in our photos, keeps the bright look while hiding more of the dust that blows in from farm country.

Will a flake floor hold up to the sun on a covered patio?

Yes, as long as the topcoat is UV-stable. Fresno sun reaches under a patio cover more than most people expect, and epoxy left exposed to strong UV can yellow over time. The speckled flake also hides small color shifts better than a solid color would. For outdoor slabs, see our patio and porch coatings page.

More in Hanford

Other services in Hanford

Ready to start your Hanford flake floor project?

Free estimates. Call or fill out the form.