Ferrer Epoxy Coatings Inc. logo
A solid gray epoxy garage floor seen from the open garage door

Polyaspartic Floors · Hanford, CA

Polyaspartic Floor Coating in Hanford, CA

Polyaspartic floor coatings for Hanford homes and businesses. Call or fill out the form for pricing.

5.05-star rated Google & HomeAdvisor

Hanford, Kings County and every town in Fresno, Madera and Kings counties

Swipe for more reviews →

Get a Free Polyaspartic Floor Estimate in Hanford

Free estimates. Fill out the form or call, and we'll get right back to you.

  • Free estimates
  • Licensed & insured
  • CA license #1103536
  • Homes & businesses

Fill out the form below to get your free estimate 👇

Rather talk? Call us now: (559) 917-1020

Polyaspartic Floor Coatings · Hanford

Polyaspartic Floor Coatings for Hanford properties

People from Civic Center Park and Lacy Park to the edge of town call us for polyaspartic floor coatings and topcoats for garages and shops, in flake or solid color, built for strong sun and a fast return to use, and every job starts with a free estimate.

In Kings County the work runs from home garages and patios to dairy, packing and shop floors that need non-skid traction and a coating that stands up to daily washdowns.

Customers mention a very professional crew, a floor they love the color and shine of, and a crew that worked with them to get the color right.

What's included

Polyaspartic Floor Coatings we do in Hanford

  • 01

    Polyaspartic topcoats

    A clear polyaspartic topcoat can go over an epoxy base with flake or color. The epoxy builds the floor and holds it to the slab, and the topcoat takes the sun, tires and daily wear.

  • 02

    Full polyaspartic systems

    Where turnaround matters most, the base coat and topcoat can both be polyaspartic, so the whole floor cures faster. We go over which build fits your floor at the estimate.

  • 03

    Grinding and crack repair

    The slab is ground to remove old sealer, paint and grime, and cracks and pits are filled. A fast-curing coating needs a clean, open surface to bond to.

  • 04

    Full-broadcast flake or solid color

    Flake is broadcast edge to edge for a speckled floor that hides dust and tire marks, or the floor is built in one solid color for a clean, bright look.

  • 05

    Non-skid texture

    Entries, wash areas and shop floors that get wet can get a non-skid texture in the topcoat for better footing.

  • 06

    Garages, shops and commercial floors

    Home garages and shops in the three counties, and shops and commercial spaces anywhere in California. Business floors can be scheduled for nights, weekends or a planned shutdown.

Kings County

Polyaspartic Floor Coatings around Hanford

We work all over Hanford (near Civic Center Park, Lacy Park and Central Valley General Hospital and out by Hanford Community Medical Center) and throughout Kings County.

Hanford is the Kings County seat, south of Fresno along Highway 198. Hanford is about 29 miles south of our base in Fresno, in Kings County, one of the three counties we cover.

Floors in the Central Valley take 100-degree summers, strong sun through open garage doors, dust blowing in off the fields and slabs that can push moisture up from below. That's why prep matters most: the slab gets ground to open it up, cracks get filled, moisture gets checked, and the finish is a coating built for sun and hot tires instead of a thin coat that yellows or peels.

Ideas for your project

Polyaspartic Floor Coatings: what it can look like

  • A home garage with a smooth gray coated floor and shelving
  • A flake epoxy garage floor in front of gray wall cabinets
  • A garage slab diamond-ground and ready for coating
  • A gray flake epoxy floor in a two-car garage with the door open

How it works

How your Hanford polyaspartic floor job works

  1. 1

    Free on-site estimate

    We look at the slab, check for old coatings, cracks and moisture, and ask how soon you need the floor back. Then we recommend a build and give you a price.

  2. 2

    Grind and repair

    The slab is ground clean and opened up, and cracks and pits are filled and ground flush.

  3. 3

    Base coat and finish

    The base coat goes down in small sections, because polyaspartic sets fast, followed by the flake broadcast or the solid color coats.

  4. 4

    Topcoat and back in use

    The clear polyaspartic topcoat seals the floor. We tell you when it can take foot traffic and when cars, carts or equipment can roll back on.

Customer reviews

What our customers say

  • “Mike and his crew were excellent to work with on my polished concrete kitchen , pantry and powder room floor. I choose the wrong color (my fault) amd he worked with me to get it right. Love the color and the shine. Crew was very professional. Plan to use him again when I can budget a polished garage floor.”

    Kati K.

    Polished concrete kitchen, pantry & powder room floor · Google review of Ferrer Epoxy Coatings

  • “Reasonable price, Negotiable, and great service. Would recommend to friends.”

    Joseph T.

    Floor coating · Google review of Ferrer Epoxy Coatings

  • “They do good work in a timely manner.”

    Dana M.

    Concrete floor coating · HomeAdvisor review of Ferrer Epoxy Coatings

Questions

Polyaspartic Floor Coatings in Hanford: FAQs

Do you do polyaspartic floor coatings in Hanford, CA?

Yes. Hanford is about 29 miles south of our base in Fresno, in Kings County, one of the three counties we cover. We handle polyaspartic floor coatings and topcoats for garages and shops, in flake or solid color, built for strong sun and a fast return to use there, and the estimate is free.

Does the space need to be empty for polyaspartic floor coatings?

Yes, the floor has to be clear for grinding and coating. We go over what to move before the job and tell you when you can move back in.

How much does a polyaspartic floor coating cost?

It depends on the floor, so we price it after seeing it. The square footage, how much grinding and crack repair the slab needs, whether old coatings have to come off, the finish you pick, and whether polyaspartic is the topcoat or the whole system all affect the price. Get a free estimate and you'll have a clear number before any work starts.

What is a polyaspartic floor coating?

It is a fast-curing coating from the polyurea family, used as a clear topcoat or as a full floor system over concrete. It is known for staying clear and color-stable in sunlight, standing up to abrasion and curing in hours rather than days. You'll also see it called a polyurea floor coating. It works with flake and solid color finishes, the same looks you get with epoxy.

Is polyaspartic better than epoxy?

It depends on the floor, and often the answer is both. Epoxy builds thickness and bonds well to a ground slab, while polyaspartic handles sun and wear better and cures faster. A common build is an epoxy base under a polyaspartic topcoat. We look at your slab, the sun it gets and how fast you need it back, then recommend one.

Will it hold up to Fresno sun and hot tires?

Yes, that is what polyaspartic is known for. It stays clear in strong sun instead of yellowing the way plain epoxy can, which matters where a garage door stays open on 100°F+ afternoons or sun reaches a shop floor. Hot-tire lifting mostly happens with thin coatings on a slab that was never ground, so grinding first matters as much as the coating.

More in Hanford

Other services in Hanford

Ready to start your Hanford polyaspartic floor project?

Free estimates. Call or fill out the form.