
Moisture Mitigation · San Diego, CA
Concrete Moisture Mitigation in San Diego, CA
Moisture mitigation for San Diego businesses. Call or fill out the form for pricing.
Based in Fresno · commercial and industrial floors anywhere in California
Swipe for more reviews →
Get a Free Moisture Mitigation Estimate in San Diego
Free estimates. Fill out the form or call, and we'll get right back to you.
- Free estimates
- Licensed & insured
- CA license #1103536
- Homes & businesses
Fill out the form below to get your free estimate 👇
Moisture Mitigation · San Diego
Moisture Mitigation for San Diego businesses
San Diego businesses call us for concrete moisture mitigation, testing slabs and sealing them with a moisture barrier before coatings or glue-down flooring go down. We're a licensed and insured California contractor (license #1103536) based in Fresno, working on commercial and industrial floors across the state, and every job starts with a free estimate.
Around San Diego the calls tend to be breweries, food producers, commercial kitchens and warehouses, where floors stay wet, get hosed down and need traction.
Commercial floors can't always close for a week, so we schedule around production: weekend, night and planned-shutdown work for plants and warehouses, and room-by-room phasing when the building has to stay open.
What's included
Moisture Mitigation we do in San Diego
- 01
Moisture checks
We look for blistering, soft glue and other signs of moisture, and test the slab so the decision rests on readings instead of guesswork.
- 02
Grinding and slab prep
Old coatings, glue and sealer are ground off and the surface is opened up so the moisture barrier bonds to clean concrete.
- 03
Crack and joint prep
Cracks are repaired and joints are prepared so the barrier covers the slab as one continuous layer.
- 04
Moisture barrier coat
A moisture-tolerant coating is applied across the slab to limit the moisture vapor that reaches the floor above it.
- 05
Under epoxy and urethane cement
Epoxy, quartz, flake, polyaspartic and urethane cement floors go on over the barrier as part of the same job.
- 06
Under glue-down flooring
Glue-down LVT and LVP, VCT and carpet tile get a sealed surface to bond to instead of a damp slab.
San Diego County
Moisture Mitigation around San Diego
San Diego is about 310 miles southeast of our base in Fresno. We take commercial and industrial floor jobs anywhere in California and plan the trip, prep and cure times around your schedule. San Diego is in San Diego County, and we also work in Chula Vista, Escondido, Oceanside and Irvine.
Most commercial floors fail at the prep, not the coating: old sealers and paint left on the slab, moisture coming up through it, cracks and joints that were never repaired, and drains the floor doesn't slope to. That's why every job starts with grinding to clean, sound concrete and a look at moisture, joints and drains before anything goes down.
How it works
How your San Diego moisture mitigation job works
- 1
Free on-site estimate
We look at the slab and any old flooring that has failed, ask what is going down next, and test the slab for moisture.
- 2
Choose the system
Based on the results and the finished floor, we decide whether the slab needs mitigation and plan the schedule, including nights or weekends.
- 3
Grind and repair
The slab is ground to clean, open concrete, and cracks, joints and damaged areas are repaired.
- 4
Barrier and finished floor
The moisture mitigation coat goes down and cures, then the coating or flooring is installed over it.
Customer reviews
What our customers say
“Mike and his crew were excellent to work with on my polished concrete kitchen , pantry and powder room floor. I choose the wrong color (my fault) amd he worked with me to get it right. Love the color and the shine. Crew was very professional. Plan to use him again when I can budget a polished garage floor.”
Kati K.
Polished concrete kitchen, pantry & powder room floor · Google review of Ferrer Epoxy Coatings
“Reasonable price, Negotiable, and great service. Would recommend to friends.”
Joseph T.
Floor coating · Google review of Ferrer Epoxy Coatings
“They do good work in a timely manner.”
Dana M.
Concrete floor coating · HomeAdvisor review of Ferrer Epoxy Coatings
Questions
Moisture Mitigation in San Diego: FAQs
Do you do moisture mitigation in San Diego, CA?
Yes. San Diego is about 310 miles southeast of our base in Fresno. We take commercial and industrial floor jobs anywhere in California and plan the trip, prep and cure times around your schedule. We handle concrete moisture mitigation, testing slabs and sealing them with a moisture barrier before coatings or glue-down flooring go down there, and the estimate is free.
Can the work happen nights, weekends or during a shutdown?
Yes. We schedule commercial jobs around production, including weekend, night and planned-shutdown work, and phase larger buildings so part of the floor stays in use.
What is concrete moisture mitigation?
It is a coating system applied to the top of a concrete slab to limit how much moisture vapor comes up through it. It goes on before the finished floor, so epoxy, urethane cement or glue-down flooring stays bonded instead of blistering or coming loose. It is used when a slab tests too wet for the floor going on it.
How do I know if my slab has a moisture problem?
Testing is the only way to know for sure. Warning signs include blistering or bubbling coatings, glue oozing at tile seams, curling tiles, white powder along joints and dark damp patches. A slab can look dry and still push moisture up, so we test it at the estimate when the floor going on it calls for it.
Is this the same as a vapor barrier under the slab?
No. A vapor barrier under a slab is a plastic sheet laid on the ground before the concrete is poured. If a slab never had one, or it has torn or broken down, it cannot be added later without pouring a new slab. A moisture mitigation system works from the top instead, as a moisture barrier coat on the existing concrete.
How much does moisture mitigation cost?
It depends on the slab, so we price it after testing and seeing it. Square footage, how much moisture is coming up, how much old flooring and glue has to come off, crack and joint repair, and the floor going on top all play a part. Call or fill out the form to get a free estimate.
More in San Diego
Other business services in San Diego

Polished Concrete
Polished concrete and grind-and-seal floors for kitchens, living areas, shops and storefronts, with old coverings ground off and the slab finished to the sheen you pick.
See polished concrete
Commercial Epoxy Flooring
Commercial epoxy floors for shops, warehouses, showrooms, kitchens and event spaces, with flake, metallic, non-skid, cove base and striping where they are needed.
See commercial epoxy flooring
Industrial Epoxy Flooring
Industrial epoxy floors for plants and warehouses, with repairs around production lines and forklift lanes and weekend, night or shutdown scheduling.
See industrial epoxy flooring
Urethane Cement Flooring
Urethane cement floors for food plants, packing houses and commercial kitchens, with epoxy or urethane cove base, quartz finishes and tight work around floor drains.
See urethane cement flooring
Epoxy Quartz Flooring
Slip-resistant epoxy quartz floors for kitchens, food plants, restrooms and wet work areas, with cove base and tight work around drains.
See epoxy quartz flooring
Floor Striping & Safety Markings
Warehouse and plant floor striping, from forklift lanes and walkways to arrows, parking bays and crosshatched keep-clear zones.
See floor striping & safety markings

Ready to plan your San Diego moisture mitigation job?
Free estimates. Nights, weekends and shutdowns. Call or fill out the form.
