Ferrer Epoxy Coatings Inc. logo
A solid gray epoxy garage floor seen from the open garage door

Polyaspartic Floors · Clovis, CA

Polyaspartic Floor Coating in Clovis, CA

Polyaspartic floor coatings for Clovis homes and businesses. Call or fill out the form for pricing.

5.05-star rated Google & HomeAdvisor

Clovis, Fresno County and every town in Fresno, Madera and Kings counties

Swipe for more reviews →

Get a Free Polyaspartic Floor Estimate in Clovis

Free estimates. Fill out the form or call, and we'll get right back to you.

  • Free estimates
  • Licensed & insured
  • CA license #1103536
  • Homes & businesses

Fill out the form below to get your free estimate 👇

Rather talk? Call us now: (559) 917-1020

Polyaspartic Floor Coatings · Clovis

Polyaspartic Floor Coatings for Clovis properties

Looking for polyaspartic floor coating in Clovis? Ferrer Epoxy Coatings is licensed and insured, and Clovis is part of our regular service area, about 9 miles from Fresno. We handle polyaspartic floor coatings and topcoats for garages and shops, in flake or solid color, built for strong sun and a fast return to use there.

Around Fresno and Clovis most calls are garage floors, where a flake system hides dust and tire marks, plus metallic and solid-color floors inside homes, and shop, warehouse and kitchen floors for local businesses.

Customers mention a very professional crew, a floor they love the color and shine of, and a crew that worked with them to get the color right.

What's included

Polyaspartic Floor Coatings we do in Clovis

  • 01

    Polyaspartic topcoats

    A clear polyaspartic topcoat can go over an epoxy base with flake or color. The epoxy builds the floor and holds it to the slab, and the topcoat takes the sun, tires and daily wear.

  • 02

    Full polyaspartic systems

    Where turnaround matters most, the base coat and topcoat can both be polyaspartic, so the whole floor cures faster. We go over which build fits your floor at the estimate.

  • 03

    Grinding and crack repair

    The slab is ground to remove old sealer, paint and grime, and cracks and pits are filled. A fast-curing coating needs a clean, open surface to bond to.

  • 04

    Full-broadcast flake or solid color

    Flake is broadcast edge to edge for a speckled floor that hides dust and tire marks, or the floor is built in one solid color for a clean, bright look.

  • 05

    Non-skid texture

    Entries, wash areas and shop floors that get wet can get a non-skid texture in the topcoat for better footing.

  • 06

    Garages, shops and commercial floors

    Home garages and shops in the three counties, and shops and commercial spaces anywhere in California. Business floors can be scheduled for nights, weekends or a planned shutdown.

Fresno County

Polyaspartic Floor Coatings around Clovis

We work all over Clovis (near Sierra Bicentennial Park and Clovis Rodeo Park) and throughout Fresno County.

Clovis borders Fresno to the northeast, on Highway 168 toward the Sierra foothills. Clovis is about 9 miles northeast of our base in Fresno, in Fresno County, one of the three counties we cover.

Floors in the Central Valley take 100-degree summers, strong sun through open garage doors, dust blowing in off the fields and slabs that can push moisture up from below. That's why prep matters most: the slab gets ground to open it up, cracks get filled, moisture gets checked, and the finish is a coating built for sun and hot tires instead of a thin coat that yellows or peels.

Ideas for your project

Polyaspartic Floor Coatings: what it can look like

  • A home garage with a smooth gray coated floor and shelving
  • A flake epoxy garage floor in front of gray wall cabinets
  • A garage slab diamond-ground and ready for coating
  • A gray flake epoxy floor in a two-car garage with the door open

How it works

How your Clovis polyaspartic floor job works

  1. 1

    Free on-site estimate

    We look at the slab, check for old coatings, cracks and moisture, and ask how soon you need the floor back. Then we recommend a build and give you a price.

  2. 2

    Grind and repair

    The slab is ground clean and opened up, and cracks and pits are filled and ground flush.

  3. 3

    Base coat and finish

    The base coat goes down in small sections, because polyaspartic sets fast, followed by the flake broadcast or the solid color coats.

  4. 4

    Topcoat and back in use

    The clear polyaspartic topcoat seals the floor. We tell you when it can take foot traffic and when cars, carts or equipment can roll back on.

Customer reviews

What our customers say

  • “Mike and his crew were excellent to work with on my polished concrete kitchen , pantry and powder room floor. I choose the wrong color (my fault) amd he worked with me to get it right. Love the color and the shine. Crew was very professional. Plan to use him again when I can budget a polished garage floor.”

    Kati K.

    Polished concrete kitchen, pantry & powder room floor · Google review of Ferrer Epoxy Coatings

  • “Reasonable price, Negotiable, and great service. Would recommend to friends.”

    Joseph T.

    Floor coating · Google review of Ferrer Epoxy Coatings

  • “They do good work in a timely manner.”

    Dana M.

    Concrete floor coating · HomeAdvisor review of Ferrer Epoxy Coatings

Questions

Polyaspartic Floor Coatings in Clovis: FAQs

Do you do polyaspartic floor coatings in Clovis, CA?

Yes. Clovis is about 9 miles northeast of our base in Fresno, in Fresno County, one of the three counties we cover. We handle polyaspartic floor coatings and topcoats for garages and shops, in flake or solid color, built for strong sun and a fast return to use there, and the estimate is free.

Does the space need to be empty for polyaspartic floor coatings?

Yes, the floor has to be clear for grinding and coating. We go over what to move before the job and tell you when you can move back in.

What is a polyaspartic floor coating?

It is a fast-curing coating from the polyurea family, used as a clear topcoat or as a full floor system over concrete. It is known for staying clear and color-stable in sunlight, standing up to abrasion and curing in hours rather than days. You'll also see it called a polyurea floor coating. It works with flake and solid color finishes, the same looks you get with epoxy.

Is polyaspartic better than epoxy?

It depends on the floor, and often the answer is both. Epoxy builds thickness and bonds well to a ground slab, while polyaspartic handles sun and wear better and cures faster. A common build is an epoxy base under a polyaspartic topcoat. We look at your slab, the sun it gets and how fast you need it back, then recommend one.

Will it hold up to Fresno sun and hot tires?

Yes, that is what polyaspartic is known for. It stays clear in strong sun instead of yellowing the way plain epoxy can, which matters where a garage door stays open on 100°F+ afternoons or sun reaches a shop floor. Hot-tire lifting mostly happens with thin coatings on a slab that was never ground, so grinding first matters as much as the coating.

How soon can I use the floor again?

Usually much sooner than with epoxy. Polyaspartic generally cures in hours rather than days, though the exact walk-on and drive-on timing depends on the build, the temperature and the humidity. Valley heat speeds the cure and cold tule fog weeks slow it, so we give you the timing for your floor at the estimate. For businesses, the work can also be scheduled for nights, weekends or a planned shutdown.

More in Clovis

Other services in Clovis

Ready to start your Clovis polyaspartic floor project?

Free estimates. Call or fill out the form.